News Releases

Corps eager for spring rain in the Willamette and Rogue River Basins

Published March 24, 2020
Lost Creek Lake

Lost Creek Lake

Cougar Reservoir

Cougar Reservoir

The U.S. Army Corps of Engineers, Portland District (Corps) is refilling its 13 Willamette Valley Project reservoirs and two Rogue River Basin Project reservoirs to prepare for the spring and summer conservation seasons.

Refill season, which begins in February and ends in May, is crucial for the reservoir systems to adequately fill before summer.

Both the Willamette and Rogue reservoir systems, which largely depend on rainfall to drive and sustain inflows, experienced a dry winter and spring.  As a result, reservoirs aren’t at the ideal water levels to prepare for the dry summer months ahead.

The National Weather Service forecast a warm and dry spring, further highlighting the need for more precipitation.

The Corps manages reservoir inflows based on a “rule curve,” or the authorized maximum elevation on a given day to balance flood risk and storage for authorized purposes.  Both systems’ reservoirs are kept lower in the winter in an effort to reduce downstream flooding and refilled in the spring to prepare for recreation and adequate flows for fish.

Winter snowpack supplements inflows in the late summer months, as snow in high elevations melts and travels downstream into reservoirs. Snowpack equates to less than 10 percent of each system’s storage.

Corps water management experts say there is still time for a significant rain event, like last year’s April atmospheric river event, but this timeframe narrows as summer nears.

Portland District dams and reservoirs support a variety of the Corps’ authorized purposes to include flood risk management, fish and wildlife, hydropower generation and recreation.

The public is encouraged to visit the Portland District website to check the “teacup diagrams” before heading out to recreate. View water elevations, inflows and outflows, what boat ramps are in the water, and more. Visit: https://www.nwp.usace.army.mil/Missions/Flood-Risk-Management/Forecasts/

As of March 24, the below information represents current conditions at both locations.

Willamette Valley Project:
The Willamette Valley Project’s 13 reservoirs are currently 35% full. System-wide reservoir elevations are 30-feet below the rule curve.  Year-to-date precipitation in the Valley is 74% of average. Willamette Basin snowpack is currently 84% of average.

From North to South, Detroit reservoir is 34% full, Green Peter reservoir is 40% full, Foster reservoir is 50% full, Blue River is 43% full, Fern Ridge is 35% full, Fall Creek is 33% full, Cougar reservoir is 37% full, Dorena is 30% full, Cottage Grove is 33% full, Lookout Point is 32% full and Hills Creek is 29% full. Big Cliff and Dexter reservoirs act as re-regulating reservoirs rather than storage reservoirs in that they capture peak flow releases from dams upstream, hold and then steadily release water downstream.

View the Willamette River Basin teacup diagram: https://www.nwd-wc.usace.army.mil/nwp/teacup/willamette/

Rogue River Basin Project:
The Rogue River Basin Project’s two reservoirs are currently 62% full. System-wide reservoir elevations are 20-feet below the rule curve. Year-to-date precipitation in the Rogue Basin is 68% of average. Rogue River Basin snowpack is currently 68% of average.

Lost Creek reservoir is 70% full, sitting 16-feet below rule curve. Applegate is 26% full, sitting 38-feet below rule curve.

View the Rogue River Basin teacup diagram: https://www.nwd-wc.usace.army.mil/nwp/teacup/rogue/


Contact
Lauren Bennett
503-808-4510
lauren.e.bennett@usace.army.mil

Release no. 20-005

How to Subscribe to RSS

Use Edge Browser
How to follow feeds in Microsoft Edge

  1. Visit the Microsoft Edge Add-on store: https://microsoftedge.microsoft.com/addons/Microsoft-Edge-Extensions-Home. ...
  2. Search for “rss feed reader”: ...
  3. Click “Get” Next to “Feeder – RSS Feed Reader”, then Confirm by clicking “Add Extension”
  4. ​ Setup your feeds: Search for feeds one-by-one, browse the library of sites or import feeds with OP
    Use Outlook
 
  1. In Outlook, right-click the RSS Feeds folder and choose Add a New RSS Feed.

  2. In the New RSS Feed dialog box, enter the URL of the RSS Feed.

    Enter the URL for the RSS Feed

    Tip: If you need help finding the RSS feed URL on a website, look for an RSS icon.
     Button image Right-click that icon, and then copy the shortcut to the Clipboard.
    Press Ctrl+V to paste the information from the Clipboard into the RSS Feed location box.

    Choose Add > OK.                                                                

    Additional Subscription Information: Microsoft How to Subscribe to RSS feed in Outlook

Use Internet Explorer

Open Internet explorer and open any USACE website. Look for the small RSS icon and click on that icon as show in this image:

Once it opens in Internet Explorer, it will have an option at the top to subscribe to this RSS feed as show here:

 

 

 

 

 

 

Use Google Chrome
Chrome Extension allows RSS Feed Subscriptions

Free RSS Feed Readerhttps://feeder.co